胶砂流动度测定仪
Photo for reference; configuration may vary by order.
Model No. MFL-0004 · Cement & Mortar Testing Equipment
电动砂浆跳桌（BS EN 1015-3）
Dry-mix mortar plants run flow tests on every shift and need the rate to be the same each time. This table jolts a 300 ± 1 mm top through 10 ± 0.2 mm once per second using a 60 W gear motor. A digital counter is preset to 15 jolts and stops the drive, so the spread is measured at the same point every time.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Dry-mix mortar plants run flow tests on every shift and need the rate to be the same each time. This table jolts a 300 ± 1 mm top through 10 ± 0.2 mm once per second using a 60 W gear motor. A digital counter is preset to 15 jolts and stops the drive, so the spread is measured at the same point every time.
| Parameter | Value |
|---|---|
| Table top diameter 台面直径 | 300 ± 1 mm |
| Drop height 落距 | 10 ± 0.2 mm |
| Jolting rate 跳动频率 | 1 jolt per second |
| Counter 计数器 | Digital, preset 15 with auto stop |
| Moving part mass 跳动部分质量 | 4.35 ± 0.15 kg |
| Motor 电机 | Gear motor, 60 W |
| Power 电源 | 220 V, 50 Hz |
| Weight 重量 | Approx. 38 kg |
| Compliance 符合标准 | BS EN 1015-3, BS EN 459-2 |
| Model No. | MFL-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
