注射泵
Photo for reference; configuration may vary by order.
Model No. SYP-0006 · Laboratory Pumps
OEM 注射泵模块
Diagnostic analyzer and automation builders need a syringe drive that fits their own housing and talks to their controller. This module runs on 12 or 24 V DC, connects by RS232/RS485, CAN or analog, and resolves up to 6,400 steps/rev. It handles 0.1 µL/min–40 mL/min with syringes of 0.5 µL–25 mL. Dimensions are set by application.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Diagnostic analyzer and automation builders need a syringe drive that fits their own housing and talks to their controller. This module runs on 12 or 24 V DC, connects by RS232/RS485, CAN or analog, and resolves up to 6,400 steps/rev. It handles 0.1 µL/min–40 mL/min with syringes of 0.5 µL–25 mL. Dimensions are set by application.
| Parameter | Value |
|---|---|
| Flow range 流量范围 | 0.1 µL/min–40 mL/min |
| Syringe sizes 注射器规格 | 0.5 µL–25 mL |
| Host interface 主机接口 | RS232/RS485, CAN or analog |
| Supply voltage 供电电压 | 12 or 24 V DC |
| Max force 最大推力 | 20–90 N |
| Motor type 电机类型 | Stepper motor |
| Position resolution 位置分辨率 | Up to 6,400 steps/rev |
| Dimensions 尺寸 | Application specific |
| Service life 使用寿命 | Up to 5 million steps |
| Documentation 文件 | Protocol and drawings supplied |
| Model No. | SYP-0006 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
