发酵控制系统
Photo for reference; configuration may vary by order.
Model No. FCS-0005 · Fermentation Equipment
尾气分析与控制系统
Feed strategy, scale-up and mass balance work all benefit from reading what leaves the vessel. This analyzer measures exhaust O2 at 0–25% or 0–100% and CO2 at 0–10%, with CH4 and H2 optional, by paramagnetic, infrared or mass spectrometry. Accuracy is about ±0.1% absolute, and multiplexing serves one or many vessels.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Feed strategy, scale-up and mass balance work all benefit from reading what leaves the vessel. This analyzer measures exhaust O2 at 0–25% or 0–100% and CO2 at 0–10%, with CH4 and H2 optional, by paramagnetic, infrared or mass spectrometry. Accuracy is about ±0.1% absolute, and multiplexing serves one or many vessels.
| Parameter | Value |
|---|---|
| Gases measured 测量气体 | O2 and CO2 (optional CH4, H2) |
| Measurement principle 测量原理 | Paramagnetic, infrared or mass spectrometry |
| O2 range 氧气量程 | 0–25% (or 0–100%) |
| CO2 range 二氧化碳量程 | 0–10% |
| Accuracy 准确度 | ±0.1% absolute (sensor dependent) |
| Vessels supported 支持罐体数 | 1 to many with multiplexing |
| Gas conditioning 气体调理 | Drying and filtration before the sensor |
| Data output 数据输出 | OUR, CER, RQ logged with batch |
| Model No. | FCS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
