现场密度试验仪（灌砂法与环刀法）
Photo for reference; configuration may vary by order.
Model No. FDA-0002 · Soil Testing Equipment
灌砂法套件（大型灌砂筒 200 mm）
Stony fills and crushed stone sub-bases need a bigger hole to get a representative density. This set has a 215 mm pouring cylinder holding about 16 L, a 200 × 250 mm calibrating container and a 500 mm tray. It suits test holes of 200 mm diameter by 250 mm deep with particles up to 75 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Stony fills and crushed stone sub-bases need a bigger hole to get a representative density. This set has a 215 mm pouring cylinder holding about 16 L, a 200 × 250 mm calibrating container and a 500 mm tray. It suits test holes of 200 mm diameter by 250 mm deep with particles up to 75 mm.
| Parameter | Value |
|---|---|
| Pouring cylinder 灌砂筒 | 215 mm diameter, approx. 16 L |
| Test hole size 试坑尺寸 | 200 mm diameter × 250 mm deep |
| Calibrating container 标定罐 | 200 mm ID × 250 mm |
| Tray 基板 | 500 mm square with 200 mm central hole |
| Shutter 开关 | Sliding plate valve |
| Maximum particle size 最大粒径 | 75 mm |
| Material 材质 | Galvanised steel |
| Weight 重量 | Approx. 18 kg |
| Model No. | FDA-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
