聚合物分析用差示扫描量热仪
Photo for reference; configuration may vary by order.
Model No. DSCA-0005 · Polymer Analysis Equipment
聚合物分析用同步 DSC-TGA 分析仪
Measuring mass loss and heat flow on the same specimen tells you whether an endotherm is melting or evaporation. This simultaneous analyser runs from ambient to 1500 °C with 0.1 µg balance resolution and ±0.5% weighing accuracy. Atmospheres include inert gas, oxygen and humidified nitrogen, with 70–150 µL crucibles for 5–20 mg samples.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Measuring mass loss and heat flow on the same specimen tells you whether an endotherm is melting or evaporation. This simultaneous analyser runs from ambient to 1500 °C with 0.1 µg balance resolution and ±0.5% weighing accuracy. Atmospheres include inert gas, oxygen and humidified nitrogen, with 70–150 µL crucibles for 5–20 mg samples.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 1500 °C |
| Heating rate 升温速率 | 0.1–50 °C/min |
| Balance resolution 天平分辨率 | 0.1 µg |
| Weighing accuracy 称量准确度 | ±0.5% |
| Typical sample mass 典型样品量 | 5–20 mg |
| Calorimetric accuracy 量热准确度 | ±2% (indium) |
| Atmosphere control 气氛控制 | Inert, oxygen, humidified nitrogen |
| Crucible volume 坩埚容积 | 70–150 µL |
| Purge gas flow 吹扫气流量 | 20–100 mL/min |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | DSCA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
