Submersion Dynamic Mechanical Analyzer浸没式动态热机械分析仪
- Force range
- 0.001–20 N
- Force resolution
- 0.001 N
同步热分析仪

Photo for reference; configuration may vary by order.
Model No. STA-0004 · Thermal Analysis Instruments
逸出气体联用同步热分析仪
Identifying what leaves a sample is often the real goal of thermal analysis. This configuration couples a 1500 °C simultaneous analyzer to FTIR covering 4000–600 cm⁻¹ and a mass spectrometer covering 1–300 amu, via a 180–250 °C transfer line. Choose a heat flow or DTA sensor. Typical uses include battery gas evolution, pyrolysis and additive identification.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Identifying what leaves a sample is often the real goal of thermal analysis. This configuration couples a 1500 °C simultaneous analyzer to FTIR covering 4000–600 cm⁻¹ and a mass spectrometer covering 1–300 amu, via a 180–250 °C transfer line. Choose a heat flow or DTA sensor. Typical uses include battery gas evolution, pyrolysis and additive identification.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient–1500 °C |
| Balance resolution 天平分辨率 | 0.1 µg |
| Heat flow or DTA signal 热流或差热信号 | Heat flow or DTA sensor |
| Transfer line temperature 传输线温度 | 180–250 °C |
| IR spectral range 红外光谱范围 | 4000–600 cm⁻¹ |
| Mass spectrometer range 质谱质量范围 | 1–300 amu |
| Heating rate 升温速率 | 0.1–30 °C/min |
| Purge gas 吹扫气 | Nitrogen, argon, helium, air |
| Time resolution 时间分辨率 | 2–10 s per spectrum |
| Data output 数据输出 | Coupled mass, thermal and gas data files |
| Model No. | STA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.