橡胶组成分析仪
Photo for reference; configuration may vary by order.
Model No. RCA-0004 · Rubber Analysis Equipment
橡胶分析用索氏提取系统
Acetone extract, process oil, free sulfur and wax content are all found by solvent extraction before weighing. This system runs 1 to 6 vessels by classic Soxhlet or automated reflux, each with 50–150 mL of solvent, for 4–16 h or a set cycle count. Cellulose, glass fibre or PTFE thimbles are available.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Acetone extract, process oil, free sulfur and wax content are all found by solvent extraction before weighing. This system runs 1 to 6 vessels by classic Soxhlet or automated reflux, each with 50–150 mL of solvent, for 4–16 h or a set cycle count. Cellulose, glass fibre or PTFE thimbles are available.
| Parameter | Value |
|---|---|
| Extraction method 萃取方式 | Soxhlet or automated reflux |
| Solvent volume 溶剂体积 | 50–150 mL per vessel |
| Positions per run 每次处理位数 | 1–6 |
| Extraction time 萃取时间 | 4–16 h or defined cycle count |
| Heating temperature 加热温度 | Set above the solvent boiling point |
| Thimble material 滤筒材质 | Cellulose, glass fibre or PTFE |
| Drying condition 干燥条件 | 40–70 °C, then desiccator |
| Balance resolution 天平分度值 | 0.1 mg |
| Model No. | RCA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
