橡胶组成分析仪
Photo for reference; configuration may vary by order.
Model No. RCA-0005 · Rubber Analysis Equipment
橡胶胶料分析用 X 射线荧光光谱仪
Zinc oxide activator level, silica or clay loading and restricted elements in a finished rubber part can be checked in 60–300 s without destroying the sample. This XRF reads Na to U, using vacuum for light elements, with a 25–50 mm² silicon drift detector. Pressed discs, pellets or whole parts are accepted.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Zinc oxide activator level, silica or clay loading and restricted elements in a finished rubber part can be checked in 60–300 s without destroying the sample. This XRF reads Na to U, using vacuum for light elements, with a 25–50 mm² silicon drift detector. Pressed discs, pellets or whole parts are accepted.
| Parameter | Value |
|---|---|
| Element range 元素范围 | Na to U (light elements in vacuum) |
| Detector 检测器 | Silicon drift detector, 25–50 mm² |
| Energy resolution 能量分辨率 | About 130–150 eV at Mn Kα |
| Tube voltage 管电压 | Up to 50 kV |
| Detection limit 检出限 | 5–100 ppm depending on element |
| Measurement time 测量时间 | 60–300 s per sample |
| Sample preparation 样品制备 | Pressed disc, pellet or whole part |
| Measurement atmosphere 测量气氛 | Air, helium or vacuum |
| Model No. | RCA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
