流式进样器
Photo for reference; configuration may vary by order.
Model No. SAL-0003 · Flow Cytometry Equipment
带集成涡旋混匀的试管进样器
Whole blood, marrow and dense cultures settle during long queues, which skews counts. This loader vortexes each tube at 500–2,500 rpm for 1–10 seconds just before aspiration. Racks hold 20–60 tubes of 10–16 mm diameter, and optional 1D/2D barcode reading tracks every sample through the run.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Whole blood, marrow and dense cultures settle during long queues, which skews counts. This loader vortexes each tube at 500–2,500 rpm for 1–10 seconds just before aspiration. Racks hold 20–60 tubes of 10–16 mm diameter, and optional 1D/2D barcode reading tracks every sample through the run.
| Parameter | Value |
|---|---|
| Rack capacity 试管架容量 | 20–60 tubes |
| Vortex speed 涡旋速度 | 500–2,500 rpm |
| Vortex duration 涡旋时长 | 1–10 s (programmable) |
| Tube diameters 管径 | 10–16 mm |
| Carry-over 残留率 | Below 0.5% |
| Minimum sample volume 最小样品体积 | Approx. 200 µL |
| Cycle time per tube (excl. acquisition) 每管周期时间（不含采集） | Approx. 30–60 s |
| Barcode reading 条码读取 | Optional 1D/2D |
| Footprint 占地尺寸 | Approx. 50 × 50 × 45 cm |
| Interface 接口 | USB / Ethernet |
| Model No. | SAL-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
