筛分分析仪
Photo for reference; configuration may vary by order.
Model No. SIA-0004 · Particle Analysis Instruments
湿法筛分装置
Clay, silt and fines that stick to coarser grains need water to separate cleanly. This wet sieving table vibrates at 50 Hz while a water flow of 1–10 L/min rinses a stack of about five 200 or 300 mm sieves. Pressure stays at or below 0.1 MPa to protect delicate meshes from 20 µm up to 4 mm. Construction is 304 stainless steel.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Clay, silt and fines that stick to coarser grains need water to separate cleanly. This wet sieving table vibrates at 50 Hz while a water flow of 1–10 L/min rinses a stack of about five 200 or 300 mm sieves. Pressure stays at or below 0.1 MPa to protect delicate meshes from 20 µm up to 4 mm. Construction is 304 stainless steel.
| Parameter | Value |
|---|---|
| Sieve diameter 筛径 | 200, 300 mm |
| Aperture range 筛孔范围 | 20 µm–4 mm |
| Water flow 水流量 | 1–10 L/min adjustable |
| Water pressure 水压 | ≤ 0.1 MPa (delicate sieves) |
| Table motion 台面运动 | Vibrating, 50 Hz |
| Timer 定时器 | 0–99 min |
| Max stack 最大筛组 | ≈ 5 sieves |
| Material 材料 | 304 stainless steel |
| Drain 排水 | Bottom drain, ≥ 25 mm |
| Power 电源 | AC 220 V, 50/60 Hz |
| Model No. | SIA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
