Model No. FLE-0002
Self-Aerating Laboratory Flotation Cell实验室自吸式浮选槽
- Cell volume
- 0.5–3 L
- Impeller speed
- 500–2500 rpm
矿物分析仪器
Mineral Analysis
Photo for reference; configuration may vary by order.
Model No. MIA-0001 · Mining Laboratory Equipment
X-ray Diffraction Analyzer for Minerals
矿物 X 射线衍射分析仪
Identifying ore, gangue and alteration phases—and quantifying them—calls for diffraction. This XRD scans 3–160° two-theta at ± 0.01° accuracy with a 1–3 kW Cu tube, and minor phases near 0.5–1 % can be found with careful preparation. A pattern takes 5–15 min. Please plan a stable 20–25 °C room.
- Two-theta range
- 3–160°
- Angular accuracy
- ± 0.01°
- X-ray tube
- Cu anode, 1–3 kW
- Detector
- Silicon strip or solid state
- Minimum scan time
- 5–15 min per pattern
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Identifying ore, gangue and alteration phases—and quantifying them—calls for diffraction. This XRD scans 3–160° two-theta at ± 0.01° accuracy with a 1–3 kW Cu tube, and minor phases near 0.5–1 % can be found with careful preparation. A pattern takes 5–15 min. Please plan a stable 20–25 °C room.
Highlights
- 3–160° two-theta range at ± 0.01°
- Minor phases detectable near 0.5–1 %
- Silicon strip or solid-state detector options
- Low or zero-background sample holders
Applications
- Ore, gangue and alteration phase identification
- Clay, carbonate and sulfide speciation
- Quantitative phase analysis of concentrates
- Checking products for unwanted phases
Specifications 技术参数
| Parameter | Value |
|---|---|
| Two-theta range 2θ 范围 | 3–160° |
| Angular accuracy 角度准确度 | ± 0.01° |
| X-ray tube X 射线管 | Cu anode, 1–3 kW |
| Detector 探测器 | Silicon strip or solid state |
| Minimum scan time 最短扫描时间 | 5–15 min per pattern |
| Phase detection limit 物相检出限 | About 0.5–1 % with careful preparation |
| Sample holder 样品架 | Low background or zero-background plate |
| Environmental control 环境控制 | Water or air cooled, 20–25 °C stable room |
| Model No. | MIA-0001 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ISO 9516-1
ISO 11535
ISO 3082
ASTM E877
ISO 13320
IEC 61010-1
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
5 models
Model No. MIA-0002
Automated Mineralogy System自动矿物学分析系统
- Accelerating voltage
- 15–25 kV
- Detector
- Energy-dispersive X-ray spectrometer
Model No. MIA-0003
X-ray Fluorescence Spectrometer for Mineral Assay矿石化验 X 射线荧光光谱仪
- Element range
- Na to U with vacuum or helium path
- Concentration range
- From about 1 mg/kg to 100 %
Model No. MIA-0004
Davis Tube Magnetic Separator for Mineral Testing戴维斯管磁选试验机
- Feed particle size
- < 0.5 mm typical
- Pulp density
- 10–20 % solids by mass
Model No. MIA-0005
Sink-Float Analysis Apparatus for Density Separation浮沉分析装置
- Specific gravity range
- 1.25–3.5 depending on liquid
- Particle size
- 0.5–50 mm depending on vessel