X 射线粉末衍射仪
Photo for reference; configuration may vary by order.
Model No. XRD-0001 · X-Ray Analysis Instruments
台式粉末 X 射线衍射仪
Phase identification of incoming materials, cement checks and teaching need a diffractometer that fits on a bench . This theta-theta unit uses Cu K-alpha radiation and a 30–300 W tube, scans 3–160° 2-theta with ±0.02° accuracy, and finishes in 3–15 min. A 6 to 10 position changer is optional.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Phase identification of incoming materials, cement checks and teaching need a diffractometer that fits on a bench . This theta-theta unit uses Cu K-alpha radiation and a 30–300 W tube, scans 3–160° 2-theta with ±0.02° accuracy, and finishes in 3–15 min. A 6 to 10 position changer is optional.
| Parameter | Value |
|---|---|
| 2-theta range 2-theta 范围 | 3–160° |
| Angular accuracy 角度准确度 | ±0.02° |
| X-ray tube power X 射线管功率 | 30–300 W |
| Detector 检测器 | position-sensitive or solid state |
| Measurement time 测量时间 | 3–15 min per sample |
| Sample changer 自动进样器 | optional 6 to 10 positions |
| Radiation 辐射 | Cu K-alpha |
| Geometry 几何 | theta-theta |
| Enclosure 外壳 | shielded with interlocks |
| Interface 通信接口 | Ethernet / USB |
| Model No. | XRD-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
