沥青延度仪
Photo for reference; configuration may vary by order.
Model No. BDT-0005 · Bitumen & Asphalt Testing Equipment
黄铜沥青延度试模（含底板）
Worn or bent moulds change the specimen cross-section and spoil ductility results. This set has three machined brass dog-bone moulds with a 10 × 10 mm minimum section and 74.5–75.5 mm between clips, plus three base plates. Each mould splits into four pieces for clean demoulding after the glycerin-talc release coat.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Worn or bent moulds change the specimen cross-section and spoil ductility results. This set has three machined brass dog-bone moulds with a 10 × 10 mm minimum section and 74.5–75.5 mm between clips, plus three base plates. Each mould splits into four pieces for clean demoulding after the glycerin-talc release coat.
| Parameter | Value |
|---|---|
| Mould type 试模类型 | Dog-bone (briquette), 4-piece |
| Material 材质 | Brass, machined |
| Distance between clips 夹具间距 | 74.5–75.5 mm |
| Cross-section at minimum 最小截面 | 10 × 10 mm |
| Width at clip mouth 夹口宽度 | 19.8–20.2 mm |
| Base plate 底板 | Brass or polished steel, 100 × 75 mm |
| Moulds per set 每套数量 | 3 moulds with 3 base plates |
| Release agent 隔离剂 | Glycerin-talc or glycerin-dextrin mix recommended |
| Compliance 执行标准 | ASTM D113, AASHTO T 51, IS 1208 |
| Model No. | BDT-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
