混凝土钻芯机与切割机
Photo for reference; configuration may vary by order.
Model No. CDM-0005 · Concrete Testing Equipment
混凝土试件切割机（500 mm锯片）
Cores need square, parallel ends at the right length before testing, and discs for chloride tests must be cut cleanly. This saw runs a 500 mm diamond blade at 1450 r/min with 4.0 kW, cutting up to 170 mm deep. A V-block clamp holds cores up to Ø 200 mm on a 600 × 450 mm sliding table.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Cores need square, parallel ends at the right length before testing, and discs for chloride tests must be cut cleanly. This saw runs a 500 mm diamond blade at 1450 r/min with 4.0 kW, cutting up to 170 mm deep. A V-block clamp holds cores up to Ø 200 mm on a 600 × 450 mm sliding table.
| Parameter | Value |
|---|---|
| Blade diameter 锯片直径 | 500 mm diamond blade |
| Maximum cut depth 最大切深 | 170 mm |
| Table size 工作台尺寸 | 600 × 450 mm, sliding on rails |
| Motor 电机 | 4.0 kW |
| Blade speed 锯片转速 | 1450 r/min |
| Specimen clamping 试件夹持 | V-block clamp for cores up to Ø 200 mm |
| Cooling 冷却方式 | Recirculating water with pump |
| Power 电源 | 380 V, 50 Hz, 3-phase |
| Weight 重量 | Approx. 320 kg |
| Model No. | CDM-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
