塑料组成分析仪
Photo for reference; configuration may vary by order.
Model No. PCA-0001 · Plastic Analysis Equipment
塑料填料含量测定仪
Glass fibre, mineral filler and ash content are found by burning off the polymer at 625 °C per ISO 3451-1 and weighing what remains. This muffle furnace reaches 1200 °C, holds ±5 °C at working temperature and runs programmable ramps and holds. Chambers of 4–12 L take quartz, porcelain or platinum crucibles.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Glass fibre, mineral filler and ash content are found by burning off the polymer at 625 °C per ISO 3451-1 and weighing what remains. This muffle furnace reaches 1200 °C, holds ±5 °C at working temperature and runs programmable ramps and holds. Chambers of 4–12 L take quartz, porcelain or platinum crucibles.
| Parameter | Value |
|---|---|
| Maximum temperature 最高温度 | 1200 °C |
| Working temperature 常用工作温度 | 625 °C per ISO 3451-1 |
| Temperature uniformity 温度均匀性 | ±5 °C at working temperature |
| Heating rate control 升温速率控制 | Programmable ramps and holds |
| Chamber volume 炉腔容积 | 4–12 L |
| Crucible material 坩埚材质 | Quartz, porcelain or platinum |
| Balance resolution 天平分度值 | 0.1 mg |
| Typical specimen mass 典型试样质量 | 1–10 g |
| Power supply 电源 | 220 V or 380 V, 50/60 Hz |
| Model No. | PCA-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
