金相与冶金试样制备设备
Photo for reference; configuration may vary by order.
Model No. SAR-0001 · Metallurgical Laboratory Equipment
金属试样切割机
Almost every metallurgical routine starts with a clean cut. Wheels of 200–350 mm section bars up to 60–150 mm diameter at 2800–3800 rpm, or at 200–600 rpm on the low-speed option for delicate parts. Feed is manual or automatic with load control, and cut damage is typically 0.1–0.5 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Almost every metallurgical routine starts with a clean cut. Wheels of 200–350 mm section bars up to 60–150 mm diameter at 2800–3800 rpm, or at 200–600 rpm on the low-speed option for delicate parts. Feed is manual or automatic with load control, and cut damage is typically 0.1–0.5 mm.
| Parameter | Value |
|---|---|
| Wheel diameter 砂轮直径 | 200–350 mm |
| Maximum section 最大切割截面 | 60–150 mm diameter |
| Wheel speed 砂轮转速 | 2800–3800 rpm, low speed option 200–600 rpm |
| Feed control 进给控制 | Manual or automatic with load control |
| Coolant volume 冷却液容量 | 20–60 L |
| Clamping 夹紧方式 | Vice with quick-release or cam lock |
| Cut damage depth 切割损伤层 | Typically 0.1–0.5 mm |
| Power supply 电源 | 380 V, 50/60 Hz, three phase |
| Model No. | SAR-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
