黏度测试
Photo for reference; configuration may vary by order.
Model No. VTE-0005 · Lubricant Testing Equipment
微型旋转黏度计
Will this oil still reach the pump on a frozen morning? Formulators answer that with the MRV. A programmed cooling cycle of about 18 h takes samples down to −40 °C, then 6–9 cells report yield stress against the 35 Pa threshold and apparent viscosity up to roughly 400,000 mPa·s. Each cell holds about 10 mL; cooling comes from a refrigerated bath.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Will this oil still reach the pump on a frozen morning? Formulators answer that with the MRV. A programmed cooling cycle of about 18 h takes samples down to −40 °C, then 6–9 cells report yield stress against the 35 Pa threshold and apparent viscosity up to roughly 400,000 mPa·s. Each cell holds about 10 mL; cooling comes from a refrigerated bath.
| Parameter | Value |
|---|---|
| Test temperature range 试验温度范围 | −40 to −10 °C |
| Cooling profile 冷却曲线 | Programmable, ≈ 18 h cycle |
| Temperature accuracy 温度准确度 | ± 0.1 °C |
| Number of cells 测量池数量 | 6–9 |
| Sample volume per cell 单池样品量 | ≈ 10 mL |
| Apparent viscosity range 表观黏度范围 | ≈ 1,000–400,000 mPa·s |
| Yield stress detection 屈服应力检测 | Below/above 35 Pa |
| Cooling system 冷却系统 | Refrigerated circulating bath |
| Applicable method 适用方法 | ASTM D4684 |
| Model No. | VTE-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
