冲击回波检测仪
Photo for reference; configuration may vary by order.
Model No. IET-0005 · Non-Destructive Testing for Concrete & Structures
预应力孔道灌浆密实度检测仪
Voids in post-tensioned ducts leave tendons open to corrosion, and they cannot be seen once the girder is cast. This tester runs impact-echo along the duct with an automatic electromagnetic impactor, typically every 100 mm, using two 1–30 kHz accelerometers. It suits members 150–1500 mm thick and ducts of Ø50–Ø120 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Voids in post-tensioned ducts leave tendons open to corrosion, and they cannot be seen once the girder is cast. This tester runs impact-echo along the duct with an automatic electromagnetic impactor, typically every 100 mm, using two 1–30 kHz accelerometers. It suits members 150–1500 mm thick and ducts of Ø50–Ø120 mm.
| Parameter | Value |
|---|---|
| Method 测试方法 | Impact-echo along duct, end-to-end transmission |
| Sensors 传感器 | 2 accelerometers, 1–30 kHz |
| Impactor 冲击器 | Automatic electromagnetic, adjustable energy |
| Test spacing 测点间距 | 100 mm typical along duct |
| Member thickness 适用构件厚度 | 150–1500 mm |
| Duct diameter 适用孔道直径 | Ø50–Ø120 mm |
| Output 成果输出 | Void location and grouting index per duct |
| Data output 数据输出 | USB, report software |
| Power 电源 | Li-ion battery, about 8 h |
| Model No. | IET-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
