Model No. RDA-0001
Electromagnetic Vibrating Table for Maximum Index Density最大干密度电磁振动台
- Table size
- 760 × 760 mm
- Frequency
- 50 Hz or 60 Hz
相对密度试验仪
Relative Density Apparatus
Photo being updated
Photo for reference; configuration may vary by order.
Model No. RDA-0003 · Soil Testing Equipment
Relative Density Mould Set 0.1 and 0.5 Cubic Foot
相对密度试模套件（0.1和0.5立方英尺）
The vibrating table method needs moulds, guide sleeves and surcharge sized to the soil's maximum particle. This set includes 0.1 ft³ and 0.5 ft³ moulds with clamped guide sleeves, base plates and weights giving 13.8 kPa surcharge. Settlement is read with a 50 mm dial at 0.025 mm against a calibration bar.
- Small mould
- 0.1 ft³ (2830 cm³), 152 mm ID
- Large mould
- 0.5 ft³ (14,200 cm³), 279 mm ID
- Guide sleeves
- With clamp assemblies
- Surcharge base plates
- Steel, 13.8 kPa total surcharge
- Surcharge weights
- Matched to each mould
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
The vibrating table method needs moulds, guide sleeves and surcharge sized to the soil's maximum particle. This set includes 0.1 ft³ and 0.5 ft³ moulds with clamped guide sleeves, base plates and weights giving 13.8 kPa surcharge. Settlement is read with a 50 mm dial at 0.025 mm against a calibration bar.
Highlights
- 0.1 ft³ and 0.5 ft³ moulds
- Clamped guide sleeves
- 13.8 kPa surcharge
- Dial holder with calibration bar
Applications
- Maximum density with vibrating table
- Sands and gravels to 75 mm
- Earth dam filter design
- Port and reclamation fill
Specifications 技术参数
| Parameter | Value |
|---|---|
| Small mould 小试模 | 0.1 ft³ (2830 cm³), 152 mm ID |
| Large mould 大试模 | 0.5 ft³ (14,200 cm³), 279 mm ID |
| Guide sleeves 导向套筒 | With clamp assemblies |
| Surcharge base plates 加压底板 | Steel, 13.8 kPa total surcharge |
| Surcharge weights 加压砝码 | Matched to each mould |
| Dial indicator holder 百分表架 | With calibration bar |
| Dial indicator 百分表 | 50 mm × 0.025 mm |
| Weight 重量 | Approx. 120 kg complete |
| Model No. | RDA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D4253
ASTM D4254
BS 1377-4
IS 2720 (Part 14)
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. RDA-0002
Minimum Index Density Pouring Device and Mould最小干密度灌注装置及试模
- Pouring device
- Funnel with 12.7 mm and 25.4 mm spouts
- Funnel length
- Approx. 150 mm spout
Model No. RDA-0004
BS Maximum and Minimum Density Set for SandsBS砂土最大最小密度试验套件
- Compaction mould
- 1 L, 105 mm ID, with extension
- Electric vibrating hammer
- 600–800 W, with tamper foot
Model No. RDA-0005
Fork-Vibration Relative Density Apparatus for Sands振动叉式砂土相对密度仪
- Moulds
- 250 cm³ and 1000 cm³
- Vibrating fork
- Hand-held, two-prong steel
Model No. SGS-0003
Volumetric Flask Pycnometer Set 500 mL容量瓶比重计套件 500 mL
- Flask volume
- 500 mL, Class A
- Quantity
- 4 flasks
Model No. SWL-0003
Expansion Index Test Apparatus膨胀指数试验仪
- Mould
- 101.6 mm ID × 25.4 mm ring, in 3-ring mould
- Compaction
- 2.5 kg rammer, 305 mm drop