Model No. RDA-0001
Electromagnetic Vibrating Table for Maximum Index Density最大干密度电磁振动台
- Table size
- 760 × 760 mm
- Frequency
- 50 Hz or 60 Hz
相对密度试验仪
Relative Density Apparatus
相对密度试验仪
Relative Density Apparatus — Soil Testing Equipment
Clean sands and gravels do not give a clear Proctor peak, so their compaction is specified by relative density between minimum and maximum index densities. We supply an electromagnetic vibrating table, a minimum density pouring device, ASTM mould sets, a BS maximum and minimum density set for sands, and a compact fork-vibration apparatus. Particle size and your governing standard decide which method applies. The equipment follows ASTM D4253, ASTM D4254 and IS 2720 (Part 14).
5 models
Range code RDA
OEM available
Applicable standards
ASTM D4253
ASTM D4254
BS 1377-4
IS 2720 (Part 14)
How to specify
- Pick the 0.1 ft³ or 0.5 ft³ mould from the largest particle size.
- Mount the vibrating table on a concrete floor to keep amplitude steady.
- Check table amplitude with a dial indicator before each test series.
Models in this range
5 models
Model No. RDA-0002
Minimum Index Density Pouring Device and Mould最小干密度灌注装置及试模
- Pouring device
- Funnel with 12.7 mm and 25.4 mm spouts
- Funnel length
- Approx. 150 mm spout
Model No. RDA-0003
Relative Density Mould Set 0.1 and 0.5 Cubic Foot相对密度试模套件（0.1和0.5立方英尺）
- Small mould
- 0.1 ft³ (2830 cm³), 152 mm ID
- Large mould
- 0.5 ft³ (14,200 cm³), 279 mm ID
Model No. RDA-0004
BS Maximum and Minimum Density Set for SandsBS砂土最大最小密度试验套件
- Compaction mould
- 1 L, 105 mm ID, with extension
- Electric vibrating hammer
- 600–800 W, with tamper foot
Model No. RDA-0005
Fork-Vibration Relative Density Apparatus for Sands振动叉式砂土相对密度仪
- Moulds
- 250 cm³ and 1000 cm³
- Vibrating fork
- Hand-held, two-prong steel