聚合物分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHE-0001 · Polymer Analysis Equipment
聚合物熔体用旋转流变仪
Comparing molecular weight, branching or the effect of an additive on melt elasticity calls for oscillatory testing on a rotational rheometer. Torque spans 0.5 µN·m to 200 mN·m and frequency 10⁻⁴ to 100 Hz, with an oven covering −40 to 400 °C. Plates of 8–50 mm and cones of 1–4° are supported.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Comparing molecular weight, branching or the effect of an additive on melt elasticity calls for oscillatory testing on a rotational rheometer. Torque spans 0.5 µN·m to 200 mN·m and frequency 10⁻⁴ to 100 Hz, with an oven covering −40 to 400 °C. Plates of 8–50 mm and cones of 1–4° are supported.
| Parameter | Value |
|---|---|
| Torque range 扭矩范围 | 0.5 µN·m to 200 mN·m |
| Angular velocity 角速度范围 | 10⁻⁷ to 300 rad/s |
| Oscillation frequency 振荡频率 | 10⁻⁴ to 100 Hz |
| Temperature range 温度范围 | −40 to 400 °C with oven |
| Temperature accuracy 温度准确度 | ±0.2 °C |
| Normal force range 法向力范围 | 0.01–50 N |
| Gap resolution 间隙分辨率 | 1 µm |
| Geometry diameter 夹具直径 | 8–50 mm plates, 1–4° cones |
| Purge gas 吹扫气体 | Nitrogen, 5–20 L/h |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | RHE-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
