聚合物分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHE-0002 · Polymer Analysis Equipment
聚合物加工用毛细管流变仪
Extrusion and injection moulding engineers need viscosity at real processing shear rates, from 1 up to 10⁶ s⁻¹. This capillary rheometer generates up to 1000 bar, with 9.55, 12 or 15 mm barrels and dies of 0.5–2.0 mm at L/D 10, 20 or 30. Piston speed runs from 0.001 to 20 mm/s.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Extrusion and injection moulding engineers need viscosity at real processing shear rates, from 1 up to 10⁶ s⁻¹. This capillary rheometer generates up to 1000 bar, with 9.55, 12 or 15 mm barrels and dies of 0.5–2.0 mm at L/D 10, 20 or 30. Piston speed runs from 0.001 to 20 mm/s.
| Parameter | Value |
|---|---|
| Maximum pressure 最大压力 | Up to 1000 bar |
| Barrel diameter 料筒直径 | 9.55 / 12 / 15 mm |
| Temperature range 温度范围 | Ambient to 400 °C |
| Temperature accuracy 温度准确度 | ±0.5 °C |
| Piston speed 活塞速度 | 0.001–20 mm/s |
| Shear rate range 剪切速率范围 | 1–10⁶ s⁻¹ |
| Die diameters 口模直径 | 0.5–2.0 mm |
| Die L/D ratios 口模长径比 | 10, 20, 30 |
| Sample mass per test 每次样品量 | 10–50 g depending on barrel |
| Power supply 电源 | 220 V or 380 V, 50/60 Hz |
| Model No. | RHE-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
