聚合物分析用热重分析仪
Photo for reference; configuration may vary by order.
Model No. TGAA-0003 · Polymer Analysis Equipment
聚合物分析用同步热重-差示扫描量热分析仪
When decomposition overlaps a melting range, or a thermoset releases volatiles as it cures, you need weight and heat data together. This analyser measures both up to 1100 °C, with 0.1 µg balance resolution and ±5% calorimetric accuracy on indium. Nitrogen, air and oxygen are switchable for 5–20 mg samples.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When decomposition overlaps a melting range, or a thermoset releases volatiles as it cures, you need weight and heat data together. This analyser measures both up to 1100 °C, with 0.1 µg balance resolution and ±5% calorimetric accuracy on indium. Nitrogen, air and oxygen are switchable for 5–20 mg samples.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 1100 °C |
| Heating rate 升温速率 | 0.1–50 °C/min |
| Balance resolution 天平分辨率 | 0.1 µg |
| Calorimetric accuracy 量热准确度 | ±5% (indium) |
| Typical sample mass 典型样品量 | 5–20 mg |
| Atmosphere control 气氛控制 | Nitrogen, air, oxygen, switchable |
| Crucible material 坩埚材质 | Alumina or platinum |
| Purge gas flow 吹扫气流量 | 20–100 mL/min |
| Data output 数据输出 | Mass, derivative and heat-flow curves |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | TGAA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
