门尼黏度仪
Photo for reference; configuration may vary by order.
Model No. MOV-0001 · Rubber Analysis Equipment
生胶用标准门尼黏度仪
Raw rubber and natural rubber bales are graded on Mooney viscosity, and this standard viscometer runs the classic test at 100 °C. The rotor turns at 2.0 ± 0.02 rpm, torque reads 0–200 Mooney units, and cavity temperature holds ±0.3 °C. Specimens weigh about 8–10 g, with a typical 1 min preheat.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Raw rubber and natural rubber bales are graded on Mooney viscosity, and this standard viscometer runs the classic test at 100 °C. The rotor turns at 2.0 ± 0.02 rpm, torque reads 0–200 Mooney units, and cavity temperature holds ±0.3 °C. Specimens weigh about 8–10 g, with a typical 1 min preheat.
| Parameter | Value |
|---|---|
| Cavity temperature 腔体温度 | 100 °C standard condition |
| Temperature accuracy 温度准确度 | ±0.3 °C |
| Rotor speed 转子转速 | 2.0 ± 0.02 rpm |
| Rotor diameter 转子直径 | About 30.5 mm |
| Cavity diameter 腔体直径 | About 50.8 mm |
| Torque range 扭矩范围 | 0–200 Mooney units |
| Preheat period 预热时间 | 1 min typical |
| Specimen mass 试样质量 | About 8–10 g |
| Data output 数据输出 | Torque curve and Mooney value |
| Model No. | MOV-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
