橡胶分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHM-0002 · Rubber Analysis Equipment
橡胶有转子硫化仪
Some customer specifications and long-running databases are still built on oscillating disc geometry, so this rheometer keeps those results comparable. A rotor oscillates ±1° at 1.67 Hz, with torque up to 200 dN·m and an 8–10 cm³ specimen. Temperature reaches 200 °C with ±0.5 °C accuracy.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Some customer specifications and long-running databases are still built on oscillating disc geometry, so this rheometer keeps those results comparable. A rotor oscillates ±1° at 1.67 Hz, with torque up to 200 dN·m and an 8–10 cm³ specimen. Temperature reaches 200 °C with ±0.5 °C accuracy.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 200 °C |
| Temperature accuracy 温度准确度 | ±0.5 °C |
| Rotor oscillation 转子摆角 | ±1° |
| Oscillation frequency 摆动频率 | 1.67 Hz (100 cycles/min) |
| Torque range 扭矩范围 | 0–200 dN·m |
| Specimen volume 试样体积 | About 8–10 cm³ |
| Warm-up requirement 预热要求 | Defined dwell before closing |
| Data output 数据输出 | Cure curve and standard parameters |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | RHM-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
