塑料熔体流动分析仪
Photo for reference; configuration may vary by order.
Model No. MFA-0006 · Plastic Analysis Equipment
高黏度塑料用高负荷熔体流动分析仪
PE pipe grades, UHMWPE and heavily filled masterbatch flow so slowly that standard loads give almost no extrudate. This analyser's frame is designed for a continuous 21.6 kg load, with higher loads available on request. Temperature holds within ±0.1 °C over 30 min, which matters when a single test runs 10–60 min.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
PE pipe grades, UHMWPE and heavily filled masterbatch flow so slowly that standard loads give almost no extrudate. This analyser's frame is designed for a continuous 21.6 kg load, with higher loads available on request. Temperature holds within ±0.1 °C over 30 min, which matters when a single test runs 10–60 min.
| Parameter | Value |
|---|---|
| Available loads 可用负荷 | 10 / 21.6 kg standard, higher on request |
| Temperature range 温度范围 | 50–400 °C |
| Temperature accuracy 温度准确度 | ±0.2 °C |
| Temperature stability 温度稳定性 | ±0.1 °C over 30 min |
| Die dimensions 口模尺寸 | Ø 2.095 mm × 8.0 mm |
| Frame load capacity 机架承载能力 | Designed for continuous 21.6 kg load |
| Typical measurement time 典型测量时间 | 10–60 min per test |
| Preheat timer 预热定时 | 0–9999 s |
| Sample mass per test 每次样品量 | 5–12 g |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | MFA-0006 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
