Model No. GRT-0002
Grease Worker润滑脂工作器
- Sample mass
- ≈ 400 g per cup
- Stroke rate
- 60 ± 10 double strokes/min
润滑脂测试
Grease Testing
Photo for reference; configuration may vary by order.
Model No. GRT-0001 · Lubricant Testing Equipment
Automatic Grease Cone Penetrometer
自动润滑脂锥入度仪
Grease batch release and NLGI grading should not depend on who reads the dial. This penetrometer drops a 102.5 g full-scale cone for 5 ± 0.1 s and measures depth electronically over 0–620 units of 0.1 mm. Half- and quarter-scale cones suit small samples, testing is done at 25 ± 0.5 °C, and results leave via RS-232 or USB.
- Penetration range
- 0–620 (0.1 mm)
- Resolution
- 0.1 mm
- Cone mass (full-scale)
- 102.5 ± 0.05 g
- Drop time
- 5 ± 0.1 s
- Sample temperature
- 25 ± 0.5 °C
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Grease batch release and NLGI grading should not depend on who reads the dial. This penetrometer drops a 102.5 g full-scale cone for 5 ± 0.1 s and measures depth electronically over 0–620 units of 0.1 mm. Half- and quarter-scale cones suit small samples, testing is done at 25 ± 0.5 °C, and results leave via RS-232 or USB.
Highlights
- Electronic depth reading over 0–620 units
- Automatic 5 ± 0.1 s cone drop
- Full, 1/2 and 1/4 scale cones supported
- RS-232 or USB data export
Applications
- Grease batch release and NLGI classification
- Incoming grease inspection
- Formulation consistency studies
Specifications 技术参数
| Parameter | Value |
|---|---|
| Penetration range 锥入度范围 | 0–620 (0.1 mm) |
| Resolution 分辨率 | 0.1 mm |
| Cone mass (full-scale) 锥体质量（全尺寸） | 102.5 ± 0.05 g |
| Drop time 下落时间 | 5 ± 0.1 s |
| Sample temperature 样品温度 | 25 ± 0.5 °C |
| Cone types 锥体类型 | Full, 1/2 and 1/4 scale |
| Display 显示 | Digital, LCD or touch screen |
| Output 输出 | RS-232 / USB |
| Applicable methods 适用方法 | ASTM D217, ISO 2137, GB/T 269 |
| Model No. | GRT-0001 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D217
ISO 2137
ASTM D566
ASTM D2265
IP 396
ASTM D942
ASTM D1264
ASTM D6184
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. GRT-0003
Grease Dropping Point Apparatus润滑脂滴点测定仪
- Temperature range
- Ambient to 400 °C
- Heating rate
- 1–1.5 °C/min near drop
Model No. GRT-0004
Grease Oxidation Stability Tester (Oxygen Bomb)润滑脂氧化安定性测定仪（氧弹法）
- Test temperature
- 99 °C (up to 180 °C option)
- Oxygen pressure
- ≈ 760 kPa (110 psi)
Model No. GRT-0005
Grease Oil Separation Tester (Cone Bleed)润滑脂分油测定仪（锥网法）
- Test temperature
- Ambient +10 to 200 °C (100 °C standard)
- Temperature uniformity
- ± 1 °C
Model No. OXS-0002
Turbine Oil Oxidation Stability Tester (TOST)汽轮机油氧化安定性试验仪（TOST）
- Test temperature
- 95 ± 0.2 °C
- End point
- Acid number 2.0 mg KOH/g
Model No. WEA-0002
Pin-on-Disk Tribometer销盘式摩擦磨损试验机
- Normal load range
- 1–100 N
- Friction force range
- 0–50 N