Model No. GRT-0001
Automatic Grease Cone Penetrometer自动润滑脂锥入度仪
- Penetration range
- 0–620 (0.1 mm)
- Resolution
- 0.1 mm
润滑脂测试
Grease Testing
Photo for reference; configuration may vary by order.
Model No. GRT-0005 · Lubricant Testing Equipment
Grease Oil Separation Tester (Cone Bleed)
润滑脂分油测定仪（锥网法）
Packaged grease that bleeds on the shelf draws customer complaints, so QC labs check separation before release. About 10 g sits in a 60 mesh nickel wire cone inside an oven held to ±1 °C, typically 100 °C for 30 h. Order 2–12 stations; the oven runs ambient +10 to 200 °C, and weighing needs a separate 0.001 g balance.
- Test temperature
- Ambient +10 to 200 °C (100 °C standard)
- Temperature uniformity
- ± 1 °C
- Test duration
- 30 h typical
- Stations
- 2–12
- Sample mass
- ≈ 10 g
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Packaged grease that bleeds on the shelf draws customer complaints, so QC labs check separation before release. About 10 g sits in a 60 mesh nickel wire cone inside an oven held to ±1 °C, typically 100 °C for 30 h. Order 2–12 stations; the oven runs ambient +10 to 200 °C, and weighing needs a separate 0.001 g balance.
Highlights
- 2–12 stations for parallel bleed tests
- 60 mesh nickel wire cones per station
- Oven uniformity of ±1 °C up to 200 °C
- Standard 30 h run at 100 °C
Applications
- Grease storage stability
- Formulation screening of thickeners
- Quality control of packaged greases
Specifications 技术参数
| Parameter | Value |
|---|---|
| Test temperature 试验温度 | Ambient +10 to 200 °C (100 °C standard) |
| Temperature uniformity 温度均匀性 | ± 1 °C |
| Test duration 试验时长 | 30 h typical |
| Stations 工位数 | 2–12 |
| Sample mass 样品质量 | ≈ 10 g |
| Mesh size 网孔尺寸 | 60 mesh nickel wire cone |
| Oven volume 烘箱容积 | ≈ 50–100 L |
| Balance resolution 天平分辨率 | 0.001 g (separate) |
| Applicable methods 适用方法 | ASTM D6184, IP 121, ASTM D1742 |
| Model No. | GRT-0005 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D217
ISO 2137
ASTM D566
ASTM D2265
IP 396
ASTM D942
ASTM D1264
ASTM D6184
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. GRT-0002
Grease Worker润滑脂工作器
- Sample mass
- ≈ 400 g per cup
- Stroke rate
- 60 ± 10 double strokes/min
Model No. GRT-0003
Grease Dropping Point Apparatus润滑脂滴点测定仪
- Temperature range
- Ambient to 400 °C
- Heating rate
- 1–1.5 °C/min near drop
Model No. GRT-0004
Grease Oxidation Stability Tester (Oxygen Bomb)润滑脂氧化安定性测定仪（氧弹法）
- Test temperature
- 99 °C (up to 180 °C option)
- Oxygen pressure
- ≈ 760 kPa (110 psi)
Model No. OXS-0001
Rotating Pressure Vessel Oxidation Tester (RPVOT)旋转氧弹氧化安定性试验仪（RPVOT）
- Test temperature
- 150 ± 0.1 °C
- Initial oxygen pressure
- 620 kPa at 25 °C
Model No. WEA-0001
Four-Ball Wear and Extreme-Pressure Tester四球磨损及极压试验机
- Maximum load
- ≈ 10 kN (1000 kgf)
- Speed
- 1200 ± 60 rpm / 1800 ± 60 rpm