剪力与弯矩试验装置
Photo for reference; configuration may vary by order.
Model No. SFB-0002 · Structural Engineering Lab Equipment
力臂测力式弯矩试验装置
Measuring bending moment directly at a pivoted section confirms the hand calculations students make for every beam. This 900 mm span beam pivots at 300 mm, with a 125 mm moment arm reacting on a 0–100 N load cell, covering 0–12.5 N·m. The display reads 0.01 N with tare, and three sliding hangers carry up to 50 N.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Measuring bending moment directly at a pivoted section confirms the hand calculations students make for every beam. This 900 mm span beam pivots at 300 mm, with a 125 mm moment arm reacting on a 0–100 N load cell, covering 0–12.5 N·m. The display reads 0.01 N with tare, and three sliding hangers carry up to 50 N.
| Parameter | Value |
|---|---|
| Beam span 梁跨度 | 900 mm |
| Cut section 截断截面 | Pivot at 300 mm, 125 mm moment arm |
| Moment load cell 弯矩传感器 | 0–100 N, ±0.2% FS |
| Moment range 弯矩范围 | 0–12.5 N·m |
| Force display 力值显示 | Digital, 0.01 N resolution, tare |
| Load hangers 砝码吊架 | 3 hangers, sliding |
| Weight set 砝码 | 0–50 N |
| Power supply 电源 | 220 V, 50 Hz |
| Net weight 净重 | Approx. 20 kg |
| Model No. | SFB-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
