混凝土立方体与圆柱体试模
Photo for reference; configuration may vary by order.
Model No. CMO-0001 · Concrete Testing Equipment
铸铁混凝土立方体试模 150 mm
Central labs that cast cubes every day want a mould that keeps its geometry for years. This 150 mm cast iron mould has machined faces flat within 0.03 mm, internal dimensions held to ±0.15 mm and squareness of 90° ± 0.5°. Two clamped halves and a separate base make demoulding quick without damaging the cube edges.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Central labs that cast cubes every day want a mould that keeps its geometry for years. This 150 mm cast iron mould has machined faces flat within 0.03 mm, internal dimensions held to ±0.15 mm and squareness of 90° ± 0.5°. Two clamped halves and a separate base make demoulding quick without damaging the cube edges.
| Parameter | Value |
|---|---|
| Internal size 内部尺寸 | 150 × 150 × 150 mm |
| Material 材质 | Grey cast iron, machined faces |
| Construction 结构 | Two halves with base plate, clamped by screws |
| Dimensional tolerance 尺寸公差 | ±0.15 mm on internal dimensions |
| Flatness of faces 内表面平整度 | Within 0.03 mm |
| Squareness 垂直度 | 90° ± 0.5° |
| Finish 表面处理 | Machined inner faces, painted exterior |
| Weight 重量 | Approx. 11 kg |
| Standards 执行标准 | BS EN 12390-1, IS 10086 |
| Model No. | CMO-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
