室内十字板剪切仪
Photo for reference; configuration may vary by order.
Model No. LVS-0003 · Soil Testing Equipment
数显室内十字板剪切仪（扭矩传感器）
A torque sensor removes the need to swap springs and gives a full torque-rotation curve. This tester measures 0–2 N·m at 0.001 N·m and turns the vane at 1 to 90°/min by stepper motor, with 0.1° angle resolution. Three vane sizes cover about 0.5 to 200 kPa, and USB exports each run.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
A torque sensor removes the need to swap springs and gives a full torque-rotation curve. This tester measures 0–2 N·m at 0.001 N·m and turns the vane at 1 to 90°/min by stepper motor, with 0.1° angle resolution. Three vane sizes cover about 0.5 to 200 kPa, and USB exports each run.
| Parameter | Value |
|---|---|
| Torque sensor 扭矩传感器 | 0–2 N·m, 0.001 N·m resolution |
| Rotation rate 转速 | 1–90°/min, stepper motor |
| Vane sizes 十字板尺寸 | 12.7, 19 and 25.4 mm |
| Strength range 强度范围 | Approx. 0.5–200 kPa |
| Angle resolution 角度分辨率 | 0.1° |
| Display 显示 | LCD with peak and residual torque |
| Data output 数据输出 | USB |
| Power 电源 | 220 V, 50 Hz |
| Weight 重量 | Approx. 10 kg |
| Model No. | LVS-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
