塑料冲击试验机
Photo for reference; configuration may vary by order.
Model No. IMA-0004 · Plastic Analysis Equipment
塑料薄膜落镖冲击试验机
Packaging plants verifying polyethylene film, and converters comparing agricultural or greenhouse film grades, rely on dart drop results. Following ASTM D1709 method A, a 38 mm hemispherical dart falls 0.66 m onto film clamped over a 125 mm aperture. Dart mass is built up from 5 to 100 g.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Packaging plants verifying polyethylene film, and converters comparing agricultural or greenhouse film grades, rely on dart drop results. Following ASTM D1709 method A, a 38 mm hemispherical dart falls 0.66 m onto film clamped over a 125 mm aperture. Dart mass is built up from 5 to 100 g.
| Parameter | Value |
|---|---|
| Drop height 落差 | 0.66 m (ASTM D1709 method A) |
| Dart head diameter 落镖头直径 | 38 mm hemispherical typical |
| Dart mass range 落镖质量范围 | 5–100 g with weight increments |
| Film thickness range 薄膜厚度范围 | Up to 1 mm |
| Aperture diameter 开口直径 | 125 mm |
| Result output 结果输出 | Mass for 50% failure and impact energy |
| Clamping 夹持方式 | Pneumatic ring clamp |
| Conditioning 状态调节 | 23 °C, 50% RH per ISO 291 |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | IMA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
