塑料冲击试验机
Photo for reference; configuration may vary by order.
Model No. IMA-0005 · Plastic Analysis Equipment
热塑性塑料管材落锤冲击试验机
Water, gas and drainage pipe makers, and utilities checking deliveries, need a tower that handles diameters from 16 to 630 mm. With a 5–20 kg striker mass and a drop height set anywhere in the 0.5–2.5 m span, it delivers up to about 500 J. Strikers can be hemispherical, chisel or to the product standard.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Water, gas and drainage pipe makers, and utilities checking deliveries, need a tower that handles diameters from 16 to 630 mm. With a 5–20 kg striker mass and a drop height set anywhere in the 0.5–2.5 m span, it delivers up to about 500 J. Strikers can be hemispherical, chisel or to the product standard.
| Parameter | Value |
|---|---|
| Drop height 落高 | 0.5–2.5 m adjustable |
| Falling mass 落锤质量 | 5–20 kg with additional weights |
| Impact energy 冲击能量 | Up to about 500 J |
| Striker geometry 冲击头几何 | Hemispherical, chisel or per product standard |
| Specimen length 试样长度 | 200 mm nominal or three diameters minimum |
| Nominal diameters 适用公称直径 | 16–630 mm with supports |
| Conditioning temperature 状态调节温度 | −20 to 23 °C bath |
| Transfer time after conditioning 调节后转移时间 | Within 10 s typical |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | IMA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
