橡胶分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHM-0001 · Rubber Analysis Equipment
橡胶无转子硫化仪
Tyre and hose plants release every mixed batch on a cure curve, and the moving die rheometer gives that curve quickly with a small 4–5 cm³ specimen. Oscillation runs at 1.67 Hz with 0.5° or 1° amplitude, torque up to 200 dN·m, and temperature to 200 °C held within ±0.3 °C. Frames hold 1–4 cavities.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Tyre and hose plants release every mixed batch on a cure curve, and the moving die rheometer gives that curve quickly with a small 4–5 cm³ specimen. Oscillation runs at 1.67 Hz with 0.5° or 1° amplitude, torque up to 200 dN·m, and temperature to 200 °C held within ±0.3 °C. Frames hold 1–4 cavities.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 200 °C |
| Temperature accuracy 温度准确度 | ±0.3 °C |
| Die oscillation amplitude 模具摆角 | 0.5° or 1° |
| Oscillation frequency 摆动频率 | 1.67 Hz (100 cycles/min) |
| Torque range 扭矩范围 | 0–200 dN·m |
| Specimen volume 试样体积 | About 4–5 cm³ |
| Closing force 合模力 | About 8 kN |
| Cavities per frame 每台腔体数 | 1–4 |
| Data output 数据输出 | Cure curves, parameters, network export |
| Model No. | RHM-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
