橡胶分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHM-0004 · Rubber Analysis Equipment
橡胶加工用毛细管流变仪
Profile and hose extruders need to know how filler and oil loading change flow and die swell before running a line. This capillary rheometer reaches 1000 bar and 250 °C, with dies of 1.0–3.0 mm at L/D 5, 10 or 20, covering shear rates of 1–10⁴ s⁻¹. Specimens weigh 10–40 g.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Profile and hose extruders need to know how filler and oil loading change flow and die swell before running a line. This capillary rheometer reaches 1000 bar and 250 °C, with dies of 1.0–3.0 mm at L/D 5, 10 or 20, covering shear rates of 1–10⁴ s⁻¹. Specimens weigh 10–40 g.
| Parameter | Value |
|---|---|
| Maximum pressure 最大压力 | Up to 1000 bar |
| Temperature range 温度范围 | Ambient to 250 °C |
| Temperature accuracy 温度准确度 | ±1 °C |
| Die diameters 口模直径 | 1.0–3.0 mm |
| Die L/D ratios 口模长径比 | 5, 10, 20 |
| Piston speed 活塞速度 | 0.001–20 mm/s |
| Shear rate range 剪切速率范围 | 1–10⁴ s⁻¹ |
| Specimen mass 试样质量 | 10–40 g |
| Die material 口模材质 | Hardened steel or tungsten carbide |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | RHM-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
