橡胶分析用流变仪
Photo for reference; configuration may vary by order.
Model No. RHM-0005 · Rubber Analysis Equipment
橡胶动态力学分析仪
Anti-vibration mounts, tyres and seals for cold climates are chosen on damping, heat build-up and low-temperature flexibility. This DMA tests strips about 20 × 5 × 2 mm from −100 to 300 °C at 0.1–100 Hz, in tension, compression, shear or dual cantilever. Strain amplitude ranges 0.01–50%.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Anti-vibration mounts, tyres and seals for cold climates are chosen on damping, heat build-up and low-temperature flexibility. This DMA tests strips about 20 × 5 × 2 mm from −100 to 300 °C at 0.1–100 Hz, in tension, compression, shear or dual cantilever. Strain amplitude ranges 0.01–50%.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | −100 to 300 °C with cooling accessory |
| Frequency range 频率范围 | 0.1–100 Hz |
| Heating rate 升温速率 | 0.5–10 °C/min |
| Strain amplitude 应变幅值 | 0.01–50% depending on mode |
| Force range 力值范围 | 0.001–20 N |
| Deformation modes 形变模式 | Tension, compression, shear, dual cantilever |
| Specimen dimensions 试样尺寸 | Strips about 20 × 5 × 2 mm typical |
| Purge gas 吹扫气体 | Nitrogen, 50–200 mL/min |
| Data output 数据输出 | Storage and loss modulus, tan delta |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | RHM-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
