聚合物光谱分析仪
Photo for reference; configuration may vary by order.
Model No. PSP-0006 · Polymer Analysis Equipment
聚合物分析用近红外光谱仪
Once calibrated by partial least squares regression, NIR identifies incoming pellets, estimates moisture in hygroscopic resins and screens filler content within 1–10 s. The 780–2500 nm range is covered by silicon and InGaAs detectors, with reflectance, transmission or interactance modes. Fibre-optic probes allow inline film measurement.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Once calibrated by partial least squares regression, NIR identifies incoming pellets, estimates moisture in hygroscopic resins and screens filler content within 1–10 s. The 780–2500 nm range is covered by silicon and InGaAs detectors, with reflectance, transmission or interactance modes. Fibre-optic probes allow inline film measurement.
| Parameter | Value |
|---|---|
| Wavelength range 波长范围 | 780–2500 nm |
| Optical resolution 光学分辨率 | 2–10 nm |
| Detector 检测器 | Silicon and indium gallium arsenide |
| Measurement modes 测量模式 | Diffuse reflectance, transmission, interactance |
| Spot size 光斑尺寸 | 2–20 mm depending on probe |
| Scan time 扫描时间 | 1–10 s per spectrum |
| Calibration method 校准方法 | Partial least squares regression |
| Probe type 探头类型 | Fibre-optic reflectance or transmission |
| Sample temperature range 样品温度范围 | 10–60 °C for model validity |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | PSP-0006 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
