磨损分析
Photo for reference; configuration may vary by order.
Model No. WEA-0004 · Lubricant Testing Equipment
Timken OK 值试验机
Steel mills, mines and gear oil blenders qualify heavy-duty lubricants by the load they carry before scoring. Here a hardened cup turns at 800 ± 5 rpm against a steel block for 10 min, with lever weights applying about 20–400 N through a roughly 10:1 ratio. Feed oil by pump or pack grease; motor power is about 1.5–2.2 kW.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Steel mills, mines and gear oil blenders qualify heavy-duty lubricants by the load they carry before scoring. Here a hardened cup turns at 800 ± 5 rpm against a steel block for 10 min, with lever weights applying about 20–400 N through a roughly 10:1 ratio. Feed oil by pump or pack grease; motor power is about 1.5–2.2 kW.
| Parameter | Value |
|---|---|
| Spindle speed 主轴转速 | 800 ± 5 rpm |
| Test duration 试验时长 | 10 min |
| Load range 载荷范围 | ≈ 20–400 N (lever weights) |
| Test ring 试验环 | Case-hardened steel cup |
| Test block 试验块 | Hardened steel block |
| Lever ratio 杠杆比 | ≈ 10:1 |
| Lubricant supply 润滑剂供给 | Pumped oil or grease |
| Motor power 电机功率 | ≈ 1.5–2.2 kW |
| Applicable method 适用方法 | ASTM D2509, ASTM D2782 |
| Model No. | WEA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
